Holding tanks, toilets, supplies & fittings.
Sewer Hose Connector; For Connecting Sewer Hose to RV Sewer Waste Valve; Hose Adapter; 3 Inch Straight; Black
Used For: Connecting Sewer Hose To RV Sewer Waste Valve
Type: Straight Hose Adapter
With Clamp: No
Waste Holding Tank Flange; Use With Vacuum Formed Holding Tank; 3 Inch Diameter; Flush Threaded Fitting; Injection Molded; Black; ABS Plastic; Single
Application: ABS Holding Tanks - Black
Sewer Hose Connector; Locking Ring To Connect Sewer Hose To RV Holding Tank; Bayonet Ring For Connecting 3 Inch Sewer Hose; 3 Inch Inside Diameter x 4 Inch Outside Diameter.
This bayonet connects the sewer hose to the holding tank. It connects to a 3"...
This is the flapper door that goes up when flushing toilet. It is a Townsend Brand and works with 700, 800 and 900 model series. The manufacture part number is 100-1-21. This measures at 3 1/4" diameter and the metal hole measures 5/16".
This seal is a Townsend seal model is 800 &900 seriers. The maufacture part number is 910-3-02. This Seal measures 5\" on rounded side
Contains all seals to repair any plastic covered Thetford termination valve.
1-1/2” ABS Vent Check breaks the siphoning action caused by water draining. The sealing disc inside vent check automatically opens and closes allowing proper draining without septic gas escaping. The 1-1/2” Vent Check is designed to...
ABS Swivel Strainer Adapter 1 1/4" to 1 1/2". Spigot measures 1 3/4".
Waste Water Drain Adapter; Swivel Strainer Adapter; 1-1/4 Inch Spigot x 1-1/2 Inch Female Thread; ABS Plastic
Spigot x FPT 1.50" tray plug. Waste Water Drain Adapter; Male Strainer Adapter; 1-1/2 Inch Spigot x 1-1/2 Inch Female Thread; ABS Plastic
ABS P-TRAP that glues together. 1 1/2 inches P-Trap
3" Male Thread Valterra drain and sewer fittings.
3" Female Thread Valterra drain and sewer fittings.