Chassis

8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan)

Good used hub salvaged from 1948 Spartan trailer.  This is a very rare hub that Spartan on used for one year on 1948 Mansion models.    Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,...

Dexter 12" Left Hand 6000# Brake Assembly

This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs

Dexter 12" Right Hand 6000# Brake Assembly

This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs

Spring for Donut Magnet for 12" Warner Brakes

This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake.  There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x...

Spring for Brake Shoes on Warner 12" Brakes

This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake.  There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately...

Warner Brake Magnet for 12" x 2" Hub (4.75" ID)

I believe Warner brand brakes were the best ever made.  The design was simple and effective.  These magnets were used on many trailers from the early 1950's.  This magnet was designed for 6 volt systems but work fine with current 12 volt...

Warner Brake Magnet for 12" x 2" Hub

I believe Warner brand brakes were the best ever made.  The design was simple and effective.  These magnets were used on many trailers from the early 1950's.  This magnet was designed for 6 volt systems but work fine with current 12 volt...

HOLE DRILLED FOR CCH038 WHEEL (15"X5" Steel Mod)

This is for labor to drill the Alignment hole for our Part Number CCH038 15"x5" Steel Mod Wheel 5 Hole on 5-1/2" Bolt Circle. This charge is per each wheel.  So if you are purchasing more than one wheel, you'll need to purchase the same amount of...

15" x 5" Steel Mod Wheel 5 Hole on 5-1/2" Bolt Circle

If you have a larger vintage camper or trailer with 5 lugs on 5-1/2" bolt circle, this is probably the wheel you are looking for.  Silver Modular steel wheel is 15" x 5" wide with 4.25" center hole and -0.67" offset rated at 2160#.  5 lug...

1000# Top Wind Trailer Tongue Jack

Trailer Tongue Jack; Manual A-Frame Round Topwind Jack; 2 Inch Tube; 1000 Pound Lift Capacity; Powder Coated; Black; Steel; With E-Z Grip Rotating Handle/ Universal Mounting Flange; 14" Travel. See pictures for measurements. Ultra-Fab   Operation...

Grease Cap For 6 Lug Hub (Spartan & Others)

Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4"  

1/2 - 13 Right Hand Lug Bolt Reproduction

New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette...