Created with Sketch. Created with Sketch.

Jacks & Steps

Steps, jacks, dolly wheels, etc.

  • 1000# Top Wind Trailer Tongue Jack (15-1003) 1000# Top Wind Trailer Tongue Jack (15-1003)

    1000# Top Wind Trailer Tongue Jack

    Trailer Tongue Jack; Manual A-Frame Round Topwind Jack; 2 Inch Tube; 1000 Pound Lift Capacity; Powder Coated; Black; Steel; With E-Z Grip Rotating Handle/ Universal Mounting Flange; 14" Travel. See pictures for measurements.   Operation...

    Add to Cart
  • Atwood Gear Box For Front Jack Atwood Gear Box For Front Jack

    Atwood Gear Box For Front Jack

    This in an original gear box for and Atwood brand jack.  The gears appear to be in good shape and they turn freely.  One of the mounting brackets is slightly bent.  The base measures 4-1/8" x 5-3/4" and has 5 - 3/8" mounting holes. These...

    Add to Cart
  • 28 Inch Double Trailer Step (04-1005)

    28 Inch Double Trailer Step

    Entry Step; 2 Manual Folding Steps; 28 Inch Width x 8 Inch Depth; With 7 Inch Rise; 500 Pound Capacity; Permanent Mount; Straight with Rounded Corners; Black E-Coat; 9.25 Inch Collapsed Height; Gravity lock; Box Packaged Folding Type: Manual Number Of...

    Add to Cart
  • Spartan Slide Out Step (CCH017) FRONT STEP Spartan Slide Out Step (CCH017) SHOW INSTALLED

    Spartan Slide Out Step

    After 60 + years the entry step on your Spartan or Spartanette trailer is probably broken, missing, rusted out or just falling apart.  We are proud to offer this reproduction step which is built better than the original ones.  We used 3/16"...

    Add to Cart
  • 2 PACK STACKER JACK (15-1018)


    Stacker Jacks feature a heavy duty non-corroding cast aluminum base with steel screw assemble and a permanent handle. Adjustable from 11" to 17". 6,000 lb load capacity. 2 pack

    Add to Cart
  • 4 PACK STACKER JACK (15-1017)


    Used For: Stabilize Motorhome/ Travel Trailer Or Camper While Parked Type: Stacker Jack Operation Type: Manual Shape: A-Frame Weight Capacity: 6000 Pound Travel Length: 6 Inch Color/ Finish: Bare Material: Aluminum Included Crank Handle:...

    Add to Cart
  • STABILIZER JACK (15-1015)


    Trailer Stabilizer Jack Stand; Use To Stabilize Motorhome/ Travel Trailer or Camper While Parked; Manual; 1000 Pound Capacity; 11-1/2 Inch To 17-3/4 Inch Height; Swing Down Design; Bolt or Weld On; Rectangular; Steel; With 4 Inch x 3-1/2 Inch Foot;...

    Add to Cart
  • 24" SCISSOR JACK (SINGLE) (15-1010)


    Powder coated black finish resists rusting. 3 inches x 10 inches multi-hole mounting plates.  5 inch x 9 inch footpads to reduce sinking and tilting. Strong worm gear jacking mechanism won´t slip. Bolts or welds to RV frame. Installs easily...

  •  24" SCISSOR JACKS (1 PAIR) (15-1014)


    Leveling Jack; Use To Level And Stabilize For Travel Trailers/ Fifth Wheels And Tent Campers; Manual; 5000 Pound Capacity; 3-1/4 Inch To 24 Inch Travel; Scissor Type; Set of 2 Recommended Use: Travel Trailer/ Fifth Wheels/ Tent...

  • JACK FOOT (15-1012)


    Keep your tongue jack leg from sinking into soft ground. Extended foot pad requires less cranking from your jack. Fits 2” jack tubes and includes a locking pin to secure the foot pad to the jack leg during travel. Holds up to 1,000 lbs and fit...

  • 2" CASTER FOR ATWOOD (15-1013)


    Trailer Tongue Jack Caster; For Atwood 2000 Pound Capacity A-Frame Jacks and Jack Screws; Twist Lock; 2 Inch Diameter Jack Ram Size; 6 Inch Wheel Diameter. Caster. 1000lb support capacity for 2" ram. Color: Black. *** THIS ITEM HAS BEEN DISCONTINUED...