Quick view Details sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) MSRP: Now: $150.00 Add to Cart Compare Quick view Details sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly MSRP: Now: $58.00 Add to Cart Compare Quick view Details sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly MSRP: Now: $58.00 Add to Cart Compare Quick view Details sku: CH109 Spring for Donut Magnet for 12" Warner Brakes MSRP: Now: $5.00 Add to Cart Compare Quick view Details sku: CH108 Spring for Brake Shoes on Warner 12" Brakes MSRP: Now: $12.00 Add to Cart Compare Quick view Details sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CH105 Warner Brake Magnet for 12" x 2" Hub MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) MSRP: Now: $17.63 Add to Cart Compare Quick view Details sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction MSRP: Now: $23.00 Add to Cart Compare Quick view Details sku: CCH035 Fine Axle(Castle) Nut 3/4" MSRP: Now: $4.95 Add to Cart Compare Quick view Details Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $20.64 Compare Quick view Details Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $37.12 Compare Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly MSRP: Now: $58.00 Add to Cart Compare Quick view Details sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly MSRP: Now: $58.00 Add to Cart Compare Quick view Details sku: CH109 Spring for Donut Magnet for 12" Warner Brakes MSRP: Now: $5.00 Add to Cart Compare Quick view Details sku: CH108 Spring for Brake Shoes on Warner 12" Brakes MSRP: Now: $12.00 Add to Cart Compare Quick view Details sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CH105 Warner Brake Magnet for 12" x 2" Hub MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) MSRP: Now: $17.63 Add to Cart Compare Quick view Details sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction MSRP: Now: $23.00 Add to Cart Compare Quick view Details sku: CCH035 Fine Axle(Castle) Nut 3/4" MSRP: Now: $4.95 Add to Cart Compare Quick view Details Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $20.64 Compare Quick view Details Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $37.12 Compare Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly MSRP: Now: $58.00 Add to Cart Compare Quick view Details sku: CH109 Spring for Donut Magnet for 12" Warner Brakes MSRP: Now: $5.00 Add to Cart Compare Quick view Details sku: CH108 Spring for Brake Shoes on Warner 12" Brakes MSRP: Now: $12.00 Add to Cart Compare Quick view Details sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CH105 Warner Brake Magnet for 12" x 2" Hub MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) MSRP: Now: $17.63 Add to Cart Compare Quick view Details sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction MSRP: Now: $23.00 Add to Cart Compare Quick view Details sku: CCH035 Fine Axle(Castle) Nut 3/4" MSRP: Now: $4.95 Add to Cart Compare Quick view Details Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $20.64 Compare Quick view Details Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $37.12 Compare Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: CH109 Spring for Donut Magnet for 12" Warner Brakes MSRP: Now: $5.00 Add to Cart Compare Quick view Details sku: CH108 Spring for Brake Shoes on Warner 12" Brakes MSRP: Now: $12.00 Add to Cart Compare Quick view Details sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CH105 Warner Brake Magnet for 12" x 2" Hub MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) MSRP: Now: $17.63 Add to Cart Compare Quick view Details sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction MSRP: Now: $23.00 Add to Cart Compare Quick view Details sku: CCH035 Fine Axle(Castle) Nut 3/4" MSRP: Now: $4.95 Add to Cart Compare Quick view Details Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $20.64 Compare Quick view Details Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $37.12 Compare Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: CH108 Spring for Brake Shoes on Warner 12" Brakes MSRP: Now: $12.00 Add to Cart Compare Quick view Details sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CH105 Warner Brake Magnet for 12" x 2" Hub MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) MSRP: Now: $17.63 Add to Cart Compare Quick view Details sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction MSRP: Now: $23.00 Add to Cart Compare Quick view Details sku: CCH035 Fine Axle(Castle) Nut 3/4" MSRP: Now: $4.95 Add to Cart Compare Quick view Details Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $20.64 Compare Quick view Details Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $37.12 Compare Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CH105 Warner Brake Magnet for 12" x 2" Hub MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) MSRP: Now: $17.63 Add to Cart Compare Quick view Details sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction MSRP: Now: $23.00 Add to Cart Compare Quick view Details sku: CCH035 Fine Axle(Castle) Nut 3/4" MSRP: Now: $4.95 Add to Cart Compare Quick view Details Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $20.64 Compare Quick view Details Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $37.12 Compare Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: CH105 Warner Brake Magnet for 12" x 2" Hub MSRP: Now: $100.00 Add to Cart Compare Quick view Details sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) MSRP: Now: $17.63 Add to Cart Compare Quick view Details sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction MSRP: Now: $23.00 Add to Cart Compare Quick view Details sku: CCH035 Fine Axle(Castle) Nut 3/4" MSRP: Now: $4.95 Add to Cart Compare Quick view Details Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $20.64 Compare Quick view Details Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $37.12 Compare Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) MSRP: Now: $17.63 Add to Cart Compare Quick view Details sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction MSRP: Now: $23.00 Add to Cart Compare Quick view Details sku: CCH035 Fine Axle(Castle) Nut 3/4" MSRP: Now: $4.95 Add to Cart Compare Quick view Details Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $20.64 Compare Quick view Details Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $37.12 Compare Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction MSRP: Now: $23.00 Add to Cart Compare Quick view Details sku: CCH035 Fine Axle(Castle) Nut 3/4" MSRP: Now: $4.95 Add to Cart Compare Quick view Details Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $20.64 Compare Quick view Details Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $37.12 Compare Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: CCH035 Fine Axle(Castle) Nut 3/4" MSRP: Now: $4.95 Add to Cart Compare Quick view Details Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $20.64 Compare Quick view Details Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $37.12 Compare Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $20.64 Compare Quick view Details Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $37.12 Compare Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) MSRP: Now: $37.12 Compare Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view sku: CH115 8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan) Good used hub salvaged from 1948 Spartan trailer. This is a very rare hub that Spartan on used for one year on 1948 Mansion models. Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,... MSRP: Now: $150.00 Add to Cart Compare Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view sku: CH114 Dexter 12" Left Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view sku: CH113 Dexter 12" Right Hand 6000# Brake Assembly This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs MSRP: Now: $58.00 Add to Cart Compare Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view sku: CH109 Spring for Donut Magnet for 12" Warner Brakes This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake. There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x... MSRP: Now: $5.00 Add to Cart Compare Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view sku: CH108 Spring for Brake Shoes on Warner 12" Brakes This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake. There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately... MSRP: Now: $12.00 Add to Cart Compare Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view sku: CH106 Warner Brake Magnet for 12" x 2" Hub (4.75" ID) I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view sku: CH105 Warner Brake Magnet for 12" x 2" Hub I believe Warner brand brakes were the best ever made. The design was simple and effective. These magnets were used on many trailers from the early 1950's. This magnet was designed for 6 volt systems but work fine with current 12 volt... MSRP: Now: $100.00 Add to Cart Compare Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view sku: CCH037 Grease Cap For 6 Lug Hub (Spartan & Others) Grease Cap for Warner Brand hubs used on Spartans and most other 6 lug hubs from the 1940's, 1950's and some early 1960's. Dust, dirt and moisture will ruin a bearing very quickly. OD - 2.245" Height - 1-1/4" MSRP: Now: $17.63 Add to Cart Compare Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view sku: CCH093 1/2 - 13 Right Hand Lug Bolt Reproduction New Reproduction Right Hand lug bolt is 1-7/16" total length. The bolt head is 16/16" hex head. The diameter of the threads is 1/2". The 13 is the number of threads per inch which makes this a coarse thread lug bolt. These were used on Dayton/Fayette... MSRP: Now: $23.00 Add to Cart Compare Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view sku: CCH035 Fine Axle(Castle) Nut 3/4" Low-Strength Steel Locknut for Use with Cotter Pins, Zinc Plated, 3/4"-16 Thread Size MSRP: Now: $4.95 Add to Cart Compare Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Timken | sku: CCH031 Outer Wheel Bearing Race #1729 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer race you need. The Timken... MSRP: Now: $20.64 Compare Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected
Quick view Timken | sku: CCH030 Outer Wheel Bearing #1779 for 6 Lug Hubs (Spartan & Others) In the 1940’s and 1950’s there were 4 wheel bearings that were used on 90% of the trailers made. If you have a 6 lug hub which has a 5-1/2” (measured straight across) bolt circle, chances are this is the outer bearing you need. The... MSRP: Now: $37.12 Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected
