This is oversized window gasket used on Spartan front/side plexiglass windows and some windows in entry doors. This is a little bigger than the original, but we have found that it works better. The oversized gasket can be used for the center window, but because the center window has an aluminum channel on the inside to hold the gasket, this aluminum channel must be bent back for this seal to work. The specs show this to be used with 1/32" to 1/16" panel and 3/16" to 1/4" glass but we use this with our reproduction polycarbonate windows which are .177" thick and it works fine. The glass and panel sit a little deeper in this gasket than the original sized gasket so it stays in the channel better. The distance between where the aluminum panel and the glass goes is 1/4". This is the gasket we recommend for all of the front side curved Spartan windows. Be sure to check your measurements carefully to be sure this will work on your application.
Sold by the foot. The longest length in one piece is 50ft.
*YOU WILL NEED THE LOCK STRIP TOOL TO INSTALL THE LOCKING STRIP FOR THIS SEAL. YOU CAN SEARCH FOR THIS TOOL UNDER THE PART NUMBER COT001.
2 Reviews Hide Reviews Show Reviews
Great product with exact fit! Great service from techs & customer service team to assist with product installation tips.
Fast Shipping and professional service, Thank you!