Exterior

PETERSON CLEARANCE LENS - AMBER

Turn signal-parking-side marker light lens, Amber; Replacement Lens fits Peterson Light Series 562-1/566-1 4" length 2" width 1/2" depth   Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause...

Teardrop Style Incandescent Cab Marker Light - Red

This Teardrop Style Cab Marker Light uses one Incandescent bulb #67 12V4CP.  It has a plastic chrome finish base and gasket.  2 wires. Red Lens. Dimensions:       5-1/2" L     ...

Teardrop Style Incandescent Cab Marker Light - Amber

This Cab Marker Light uses one incandescent #67 12V4CP.  It has a plastic chrome finish base and gasket.  2 wires. Amber Lens. Dimensions:      5-1/2" L      2"      ...

Reproduction Bargman No. 99 Red Lens

Bargman No.99 Red Lens-Reproduction This lens is approximately 6 1/2" in diameter. It fits the original backplate & reproduction backplate assemblies. It is a reproduction of the Bargman Trail-Lite No.99(or No.98) Lens & mounts with 3 machine...

Red Lens for Trail-Lite #4 License Light

Red Lens for Trail-Lite #4 License Light This is a reproduction red lens for the Trail-Lite #4 License Light. The mounting holes are 1-7/8" on center.  Comes with gasket, two stainless steel mounting screws & lens only.   2 1\2"...

413 and 425 Series Red Replacement Lens

Trailer Light Lens; Replacement For 413 And 425 Series Flush-Mount Trailer Lights; Round; Red; Flush Mount; Polycarbonate   Compatibility: 413 And 425 Series Flush-Mount Trailer Lights Shape: Round Length (IN): 4-1/4" Width (IN):...

Pathfinder 662 Complete Light Amber

Pathfinder 662 Amber Complete Light. 4-7/8" X 3" Lights with Aluminum Back Plate. Incandescent Light.

Starburst Clearance LED Complete Light - Amber

LED Starburst Clearance light-Amber. The snap-on lens permits easy bulb & lens replacement. The low profile design reduces wind resistance, fits in compact areas. Measurements: Height: 2-3/8" Width: 2-3/8" Depth: 1"

Starburst Clearance LED Complete Light -Red

LED Starburst Clearance light- Red. The snap-on lens permits easy bulb & lens replacement. The low profile design reduces wind resistance, fits in compact areas. Measurements: Height: 2-3/8" Width: 2-3/8" Depth: 1"

Trail-Lite SS Bezel

This 2 piece stainless steel bezel is a reproduction bezel to replace the original bezel which are next to impossible to find.  The original bezel was stamped and was either steel or stainless steel.  This bezel is exactly the same size as the...

Red License Light Lens

This is a 3-1/2" diameter license light glass lens. Has 2 notches in the glass that are slightly above center and dips in 5/16" - Red.   Measurements: Height: 3-7/16" Width: 3-7/16" Depth: 1/2"

KD 540 Lens with Stainless Steel Bezel (Spartan)

This KD-540 lens is glued into the stainless steel bezel.  There are 2 of them and they are different shades of Amber. Check out our aluminum reproduction bases part # CLT047 AMBER LENS Item may vary from photo but are in comparable condition...