This clearance light is a one-piece chrome die cast aluminum housing. Includes Neoprene mounting pad to cushion lamp for long bulb life. Fits securely on all flat or slightly curved surfaces. Single retaining screw holds lens in place. Comes with mounting screws. Mounting holes are 6-3/4" on center. Uses Incandescent 12V5W Bulb.
1 Review Hide Reviews Show Reviews
The photo shows two wires. Mine has only a single, black wire. That means my lights (two amber and two red) are grounded by the included screws. I added a white, 12 gauge ground wire tom the front screw to connect to the skin for better grounding. I used 8x32 stainless steel machine screws to mount it. I aded the grounding pigtail by attaching crimp-on connectors at each end: one goes on the front mounting screw with a nylon locknut holding it in contact with the light’s body; the other crimp-on connector goes under the nylon locknut that holds the light to the coach. A stainless steel washer under each mounting screw provides a huge surface area where I scraped away the black stuff Spartan sprayed on the skin’s underside. The light is long enough it doesn’t conform to the coach’s shape as well as I like, but the thick foam should seal OK. I put silicone around the hole where the wires enter the coach just to be sure it says dry and the wires don’t rub on the skin.