Shop All

Spartan Stainless Steel Screen Door Fasteners Sold 1 each

These are the fasteners that we use to mount the wood screen doors to the hinges.  They are not exactly the same as the originals but work fine.  They are stainless steel so you never have to worry about rust.  The thread size is 8-32 and...

15" X 5" STEEL WHEELS (6 lugs on 5-1/2" bolt circle)

HOLD TIM T. 5/6/24 These used wheels for vintage campers are 15" x 5" with 6 lugs on 5-1/2" bolt circle.  They have a positive offset and have the 3 tabs for holding a hub cap on. 

Screw on Grease Cap for 12" hub - cracked

This is a used screw on grease cap for vintage 12" hubs, both 5 lug and 6 lug.  The outside diameter is 2-7/8" and it is 1-3/4" tall.  It has surface rust or paint but is still in good usable shape. These grease caps were used on Spartan,...

Screw on Grease Cap for 12" hub

This is a used screw on grease cap for vintage 12" hubs, both 5 lug and 6 lug.  The outside diameter is 2-7/8" and it is 1-3/4" tall. The inside diameter is approximately 2-5/8".  It has surface rust or paint but is still in good usable shape...

Sikaflex 221 Gray

Sikaflex-221 Caulk is a polyurethane sealant/adhesive that provides permanent elastic adhesion to a number of surfaces with excellent cut and tear resistance. Perfect for use on RVs, trucks, buses, and trailers, this fast-curing caulk is specially...

1955 Spartan 43' Imperial Mansion #1753

This trailer is being sold on consignment for the customer who originally bought the trailer from us. EXTERIOR The exterior of this vintage Spartan is very original ,very intact and pretty straight. It is built like an airplane with riveted...

Spring for Donut Magnet for 12" Warner Brakes

This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake.  There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x...

Spring for Brake Shoes on Warner 12" Brakes

This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake.  There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately...

Brake Band with Shoes for 12" Warner Brakes

This is the Warner brand 12" continuous brake band with pads that was used on many trailer from the early 1950's.  The actual measurement on this is 11-3/4" diameter x 1-3/4" wide.  This is a used part salvaged from an old trailer so it will...

Warner Brake Magnet for 12" x 2" Hub (4.75" ID)

I believe Warner brand brakes were the best ever made.  The design was simple and effective.  These magnets were used on many trailers from the early 1950's.  This magnet was designed for 6 volt systems but work fine with current 12 volt...

Warner Brake Magnet for 12" x 2" Hub

I believe Warner brand brakes were the best ever made.  The design was simple and effective.  These magnets were used on many trailers from the early 1950's.  This magnet was designed for 6 volt systems but work fine with current 12 volt...

Stainless Steel License Light with Bracket

This License Light & Plate Bracket has been remade out of 304 polished stainless steel, there are some parts that are zinc plated that are unseen. It replaces our Part#CLT033. These were used on Airstreams and some of the other Vintage campers. Comes...