Shop All

Brake Band with Shoes for 12" Warner Brakes

This is the Warner brand 12" continuous brake band with pads that was used on many trailer from the early 1950's.  The actual measurement on this is 11-3/4" diameter x 1-3/4" wide.  This is a used...

Warner Brake Magnet for 12" x 2" Hub (4.75" ID)

I believe Warner brand brakes were the best ever made.  The design was simple and effective.  These magnets were used on many trailers from the early 1950's.  This magnet was designed for 6 volt...

Warner Brake Magnet for 12" x 2" Hub

I believe Warner brand brakes were the best ever made.  The design was simple and effective.  These magnets were used on many trailers from the early 1950's.  This magnet was designed for 6 volt...

Stainless Steel License Light with Bracket

This License Light & Plate Bracket has been remade out of 304 polished stainless steel, there are some parts that are zinc plated that are unseen. It replaces our Part#CLT033. These were used on...

Trailer Tail Light - Stop/Turn/Tail/Back-Up

Trailer Tail Light - Stop/Turn/Tail/Back-Up License Mounting Bracket

HOLE DRILLED FOR CCH038 WHEEL (15"X5" Steel Mod)

This is for labor to drill the Alignment hole for our Part Number CCH038 15"x5" Steel Mod Wheel 5 Hole on 5-1/2" Bolt Circle. This charge is per each wheel.  So if you are purchasing more than one...

Reproduction Lens for Corncob Porch Light

15" x 5" Steel Mod Wheel 5 Hole on 5-1/2" Bolt Circle

If you have a larger vintage camper or trailer with 5 lugs on 5-1/2" bolt circle, this is probably the wheel you are looking for.  Silver Modular steel wheel is 15" x 5" wide with 4.25" center hole...

Spartan roof vent screen with frame

Spartan Roof Vent Screen with an aluminum frame. The outside frame measurements: 15-1/4"h x 11-1/4"w x 1/4" depth. Inside opening measurements: 14"h x 10-1/8"w.  The vent screen has some minor flaws...

Spartan Aluminum vent lid only for 12" x 16" opening

This is the newer style aluminum vent lid that was used on most 1948-1958 Spartans.  This type vent had a operator and crank to open and close the vent lid.  This same lid will work on older Spartans...